Before: Nondescript, blah table:
After: Wow!
I like to paint with Annie Sloan chalk paint (old white). The Graphics Fairy has fantastic images. I really like this french stamp image. It was tiny, but The Graphics Fairy has a tutorials on how to enlarge images and various methods to apply the images. The stamp printed out on 6 pages (reversed image)! After cutting it out, I applied Mod Podge on the top of the painted table; carefully placed each piece (face down) on top of the Mod Podged table and smoothed out all the bubbles. After a night of drying, I used a wet sponge and with a lot of patience, gently wet/pealed away the paper until I got to the image. Some of the image pulled away, but I liked the look. After the image dried again, I applied 2 coats of Mod Podge (drying between coats) to the top of the image. Then hand sanding. A dry brush with a bit of Annie Sloan Emperor's Red chalk paint. More sanding. Finished with Annie Sloan clear wax; dark wax, clear wax. <whew>
Showing posts with label end table. Show all posts
Showing posts with label end table. Show all posts
Monday, June 16, 2014
French Stamp End Table
Labels:
accent table,
Annie Sloan Chalk paint,
Annie Sloan Paint,
antiqued,
ASCP,
casual,
end table,
French,
label,
Mod Podge,
paint,
painted wood,
red,
repurposed,
table,
The Graphics Fairy,
Thrift Store,
vintage,
white
Thursday, October 3, 2013
French Label End Table
I am very proud of this project...
This was one ugly, beat-up end table:
And After:
I painted 1 coat of ASCP (cream = soft butter color). The wood stain bled through, so I had to paint the entire table with a primer/sealer. 2 more coats of ASCP (cream). For the label, I used a french label from The Graphics Fairy. To enlarge the label, there is a section on the website dedicated to transferring images. I used the 1st method to enlarge the label. It took 4 sheets of paper (8.5x11) to print the entire label. I cut out the label; taped the edges together, and applied mod podge to the front of the label; then placed the wet image face-down onto the top of the table. I then smoothed out the air bubbles with a putty scraper. The image dried overnight. To remove the paper, I wet it with water and slowly rubbed the paper off with my fingers. Some of the image came away completely, but I liked the look...it gave the entire image a worn/antiqued look to it. I then waxed the entire table/image with AS clear wax, then antiqued the table/image with AS dark wax. A little sanding; then clear/dark/clear wax.
Whew!
This was one ugly, beat-up end table:
Whew!
Subscribe to:
Posts (Atom)





